<progress id="btth9"></progress>
<sub id="btth9"><thead id="btth9"><font id="btth9"></font></thead></sub>

<sub id="btth9"></sub>

      <big id="btth9"></big>

      <progress id="btth9"></progress>

      <big id="btth9"></big>

      win7系統下載
      當前位置: 首頁 > 硬件軟件教程 > 詳細頁面

      Cisco瘦AP轉胖AP完成圖文使用教程

      發布時間:2025-04-05 文章來源:xp下載站 瀏覽:

      路由器(Router)是連接兩個或多個網絡的硬件設備,在網絡間起網關的作用,是讀取每一個數據包中的地址然后決定如何傳送的專用智能性的網絡設備,路由器最主要的功能為實現信息的轉送。

      思科瘦AP轉胖AP
      準備工作
      1.電腦安裝tftp工具,如tftpd32,3CDaemon等。

      2.將胖AP ios下載后放在tftp工具設置的文件目錄下。ios需要根據要求改成****.default后綴的文件名,比如1532要改為:ap1g3-k9w7-tar.default

      3.PC以太網口連接AP,PC配置10.0.0.x網段的IP地址,掩碼255.255.255.0,因為AP初始IP為10.0.0.1

      4.Console線連接AP,保證PC能通過console管理AP。

      附:常用的思科AP ios下載:鏈接: https://pan.baidu.com/s/1UPuQ9DrdjY0P6QdyrMe9yQ 密碼: es2v

      如鏈接失效,請留言告知或者聯系我。

      思科瘦AP轉胖AP
      1.準備工作做好后,斷開AP電源。

      2.按住AP上的mode鍵,不放,接上電源,通電。

      3.按住約20s左右,直到出現button is pressed, wait for button to be released...提示,繼續按住至少5秒。

      4.松開mode鍵,等待新ios上傳,上傳時間根據ios大小的而不同,約10min左右。瘦轉胖完成后,AP會自動重啟。

      5.登錄新的ios系統,通過show version檢查系統版本,show boot檢查系統啟動項。

      6.對于思科1242等比較老舊的AP,瘦轉胖的過程中按住mode鍵時,console窗口不會輸出任何信息,因此只能通過AP的狀態燈來判斷松開mode鍵的時間,一般有橙色變紫紅色時,松開mode鍵即可,整個按住的時間也差不多為20s。

      7.附:升級過程

      button pressed for 30 seconds
      process_config_recovery: set IP address and config to default 10.0.0.1
      process_config_recovery: image recovery
      image_recovery: Download default IOS tar image tftp://255.255.255.255/ap1g3-k9w7-tar.default

      examining image...
      extracting info (285 bytes)
      Image info:
      Version Suffix: k9w7-.152-4.JB3b
      Image Name: ap1g3-k9w7-mx.152-4.JB3b
      Version Directory: ap1g3-k9w7-mx.152-4.JB3b
      Ios Image Size: 12227072
      Total Image Size: 13169152
      Image Feature: WIRELESS LAN
      Image Family: ap1g3
      Wireless Switch Management Version: 7.6.95.12
      Extracting files...
      ap1g3-k9w7-mx.152-4.JB3b/ (directory) 0 (bytes)
      ap1g3-k9w7-mx.152-4.JB3b/html/ (directory) 0 (bytes)
      ap1g3-k9w7-mx.152-4.JB3b/html/level/ (directory) 0 (bytes)
      ap1g3-k9w7-mx.152-4.JB3b/html/level/1/ (directory) 0 (bytes)
      extracting ap1g3-k9w7-mx.152-4.JB3b/html/level/1/appsui.js (563 bytes)
      extracting ap1g3-k9w7-mx.152-4.JB3b/html/level/1/back.shtml (512 bytes)
      extracting ap1g3-k9w7-mx.152-4.JB3b/html/level/1/cookies.js (5032 bytes)
      ....
      New software image installed in flash:/ap1g3-k9w7-mx.152-4.JB3b
      Configuring system to use new image...done.
      Requested system reload in progress...download took about 449 seconds
      Loading "flash:/ap1g3-k9w7-mx.152-4.JB3b/ap1g3-k9w7-mx.152-4.JB3b"...########################################################################################################################################################################################

      ap#show version
      Cisco IOS Software, C1530 Software (ap1g3-K9W7-M), Version 15.2(4)JB3b, RELEASE SOFTWARE (fc1)
      Technical Support: http://www.cisco.com/techsupport
      Copyright (c) 1986-2014 by Cisco Systems, Inc.
      Compiled Thu 23-Jan-14 21:52 by prod_rel_team
      .....

      ap#show boot
      BOOT path-list: flash:/ap1g3-k9w7-mx.152-4.JB3b/ap1g3-k9w7-mx.152-4.JB3b
      Config file: flash:/config.txt
      Private Config file: flash:/private-config
      Enable Break: yes
      Manual Boot: no
      Enable IOS Break: no


      本文可以幫助您基本地設置和管理您的路由器。

      本文章關鍵詞: Cisco瘦AP轉胖AP 
      日本不卡免费新一区二区三区